NightCap Penis Pump & Stroker | Wide-Edge, 3 Intensities

Specifications

Why You'll Love It

The wide edge is the point. Traditional straight cylinders can pull the balls in during suction. This one's widened entrance is designed specifically to prevent that — a comfort and safety upgrade you feel from the first session.

Two buttons, total control. One to build pressure, one to release it. You dictate both the intensity and how long you hold it — the part most pumps get wrong.

Three intensities, both ends of the scale. Gentle enough for a first session, strong enough for experienced users.

Watch it happen. The calibrated cylinder shows engorgement and firmness building in real time rather than leaving you to guess.

Vacuum that does real work. Negative pressure draws blood into the tissue and dilates the vessels, nourishing and engorging as you go.

A stroker when you want one. Fit the vaginal pussy sleeve and it becomes a sucking masturbator with manually controlled breathing pressure.

8-inch tube, generous girth. Fits most men comfortably.

Materials chosen per part. Durable ABS tube, silicone base rings, soft TPE sleeves.

Confidential shipping. Nothing on the outside gives it away.

How to Use

Pump mode

Assemble the device. Join the power controller, pipe and cylinder together so every connection is secure.

Pick your ring. Choose a silicone base ring from the three included — you want a snug fit, neither pinching nor slipping.

Lubricate. Apply a sensible amount of lubricant to the rim and shaft for a smoother seal.

Position and seal. Insert, press the cylinder firmly against the pelvis, and make sure the seal is airtight with no leakage — the vacuum only works if nothing escapes.

Power on at the lowest setting. Always begin at the gentlest of the three intensities and build from there.

Hold and watch. Maintain the pressure for as long as it stays comfortable, tracking the change against the calibrated cylinder.

Release when ready. Press the release button and the pressure drops instantly.

Masturbator mode

Fit the vaginal pussy sleeve, then use the manually controlled breathing pressure for sucking stimulation.

Care Instructions

Detach the sleeve and rings after every session.

Wash the removable components and dry them fully.

Keep the pump body and power controller dry.

Reassemble only once every part is completely dry.

Store dry with components separated.

Frequently Asked Questions (FAQ)

What's the benefit of the wide-edge cylinder?
Unlike traditional straight cylinders, the widened entrance is designed to prevent the balls being drawn in during suction — more comfortable and more secure.

How many suction intensities does it have?
Three, suitable for beginners through to advanced users.

Can it be used as a masturbator?
Yes. Fit the vaginal pussy sleeve and it works as a sucking stroker with manually controlled breathing pressure.

How do I control the pressure?
One button builds pressure, one releases it — so you control both intensity and holding time.

How do I set it up?
Connect the power controller, pipe and cylinder, fit a silicone ring, apply lubricant, seal the cylinder against the pelvis, and power on at the lowest setting.

Why isn't the suction working?
Almost always a seal issue. Press the cylinder flat against the pelvis, use enough lubricant, and check the ring fits snugly — any gap lets air in and kills the vacuum.

What size is the cylinder?
8 inches in length with an 8-inch girth, fitting most men.

Can I see my progress?
Yes. The cylinder is calibrated, so engorgement is visible as it builds.

What materials is it made from?
A durable ABS vacuum tube, silicone base rings, and TPE sleeves.

What's included?
Three base rings, one pleasure sleeve, and a vaginal pussy sleeve.

Is shipping discreet?
Yes, it ships confidentially.